Air Leak Tester

Product Details:

Description
T3P is an innovative device for leak tests by absolute pressure decay measurement. The touch interface, with the color display and the testing real-time view, make the programming and use simple and immediate.Its high measurement resolution and test accuracy, together with the electronic regulation of the filling pressure, allow to perform not only leak tests but also destructive burst test, safety valves opening checks, volumetric control, obstruction tests and “in bell” tests on sealed products or by interception method.The control of external automation, the interface with barcode readers and printers and the possibility to record the tests on USB memories or via Ethernet make it a complete and suitable instrument for the most modern production applications.

Options and Accessories

• Double channel circuit
• Setup for vacuum test
• 2 programmable pneumatic outputs for external commands (coupler/marker)
• I/O expansion: adds digital PLC inputs/outputs (8+8) and a RS232/RS485 serial line
• Additional USB, Ethernet, ProfiBUS or CANbus interfaces for remote control and data collection
• Real time SPC statistical analysis
• Software to manage a label printer and a barcode reader
• Air filters
• Certificated Leak Master to be inserted in the Staubli® connector
• Holders for burst test
• Barcode and/or printer
• Remote control keypad
• 3-colours indicator light with loud sound alert
• External pneumatic module for vacuum generation
• External valve for volume check and tests in sealed “bell”
• Module for external discharge

Customized programs for PC/HMI terminal

• Software to collect and manage the data of the tests
• Viewing and management of several testing stations.
• Parameter programming and SPC analysis of test data.
• Virtual Instrument for National Instruments LabViewTM available at request.

Product Details:

TM3PF is an instrument for measurement of pressure and flow in air, directly measures pressure and flow rate through the product being tested.

In particular TM3PF-CV is used for Check Valves and measures the peak pressure reached before the opening of the valve but also the pressure and the residual flow when the valve opens.

 

Performances

Delta TM3PF ­­is a pneumatic module with direct flow measurement for leak or flow testing.

The instrument directly measures pressure and flow rate through the product being tested (filters, taps, valves, ...). Testing times below 1 second can be reached for leak or flow rate tests on small volumes. It is available the dislocated pressure reading on the tested product.

 

TM3F – CV is an instrument to measure pressure and flow in air for Check Valves.

The instrument measures both the peak pressure reached before the opening of the valve and also the pressure and the residual flow when the valve opens. Before the test starts, the testing module checks the initial conditions of pressure and free output flow.

 

Connectivity:

TM3PF has digital I/O interfaces for PLC connection, USB/RS485 for programming and for data collection, a software to collect and manage the tests data for PC.

 

This instrument can be connected and controlled by every PLC and interfaced to HMI terminal which is provided with serial lines, USB host and Ethernet interface.

 

The software manager permits to collect and manage tests data, to set up the parameters, programming and do SPC analysis of tests data.


Benefits:

• Flow measurement: up to 160 l/min
• Resolution: up to 0.01 cm3/min
• Full scale pression up to 10 bar
• Resolution: up to 0.1 Pa
• Units of measure: cm3/min; cm3/h
• Up to 300 testing tables
• Digital I/O interfaces for PLC connection
• USB/RS485 for programming and for data collection
• HMI operator terminal available: 4.3” colour touch screen, with its own free software, that can handle up to 8 TM3 modules.
• HMI fully Interfaceable: USB – Serial lines RS485/232 – Ethernet
• Software Manager, dedicated for TM3 modules management data storage and statistical process, is available.
• External automations and devices control: Staubli connector – HMI terminal – vacuum generator – valve for volume control – pressure regulator – printer, barcode and QRcode reader.

 

Product Details:

Description

Provaset 2P is a compact, versatile and extremely reliable instrument. Especially suited to test products having small and medium sizes in test benches, it can also be used with remote digital signals.

Provaset 2P is equipped with RS485 serial interface through which you can manage the instrument remotely and collect the data of the test, allowing to move your production toward the Lean methodologies.

Provaset 2P is available with 2 or 6 bar full scale test pressure and with 0.01 mbar (1 Pa) and 0.1 mbar (10 Pa) pressure measurement resolution, respectively.

 

Options and Accessories

• Programming key
• Pipe fittings 8x6 mm 
• Remote control box with START function, PASSED/FAILED outcome led, 10’ (3 m) cable
• Air filters
• Staubli connector assembled on an external “T” fitting for Leak Masters

Product Details:

DELTA TM3P 
PNEUMATIC MODULE FOR LEAK TESTS BYABSOLUTE PRESSURE DECAY
DescriptionThe DELTA TM3P pneumatic modules represent the extreme synthesis of traditional leak test equipment and are the best solution to integrate a reliable and compact test station into your automation.
The absence of buttons and displays has reduced the overall dimensions, so as to guarantee their placement in any type of system, as close as possible to the component under test, minimizing superfluous volumes and increasing the speed and sensitivity of testing. The modules DELTA TM3P tires can be connected and controlled from any PLC and interfaced to operator terminals.

• Leak tests up to 20 bar and in vacuum
• Resolution up to 0.1 Pa (0.001 mbar)
• Pneumatic and electronic circuits completely intergrated
• Reduction of the test time
• Easy to install and use
• Digital interface for PLC
• RS485/USB communication interfaces
• 300 test tables